Coolyoutubeproxy Coolyoutubeproxy

"Life’s TOUGH and it’s gonna get worse AFTER I BEAT YOU!"

 Making A Fire Without Matches


One thing we don't see is the whole process in one camera shot. This might be because it takes a long time to make a fire using primitive means. It is also very easy to fail at any one of the six crucial steps, and that means no fire. Here are the six steps to making a fire without matches or a lighter:

1. Gathering the right kind of tinder.


2. Gathering firewood and laying a good fire.


3. Making the fire-starting tools.


4. Using the tools the right way to create an ember.


5. Blowing the ember into a flame using the tinder.


6. Starting a fire with the burning tinder.


Making A Fire


Of these steps, numbers 4 and 5 are by far the most difficult. You probably already know how to gather dry wood and lay it in a way that allows air into it, with tinder at the center, around that, and small pieces of firewood ready to add. Making the tools, whether a hand-spun spindle or a bow and drill setup, is relatively easy too, once you've seen how and tried it once or twice.

Tinder needs to have very specific qualities when you don't have matches. Paper, for example, is a great tinder for starting a fire with matches, but it won't easily take and hold a spark or ember and allow you to blow it into a flame. That is what you in good tinder materials when you don't have matches. These materials include lint from your pocket, cattail seed head down, fine dry grass, cotton twine, cotton cloth, and dry-rotted wood.

Some dry funguses that grow on trees work well too. Experiment with these. You can also scrape the outside of some trees, like western cedars, to get a small pile of fuzzy bark for tinder.

The tinder should be placed in a nest or ball of dry grass. The moment you get your spark or coal, you will drop it into the center and into it gently. With practice, you should be able to blow this ember into a flame within a minute or so. If not, try other tinder materials. You can mix several, like lint, cattail fuzz, and finely shredded soft bark.

Here is the basic routine: Whether using a bow and drill, a fire plow or a simple spindle and fire board, you need to create enough friction to get a small ember. This is into the tinder you have prepared, and blown into a flame. This flaming tinder is then transferred to the kindling and firewood you have prepared, and soon you have a blazing fire.

Now it is time for a confession. I've practiced every element of this process. I can lay a good fire, collect great tinders, and blow them into a flame from an ember. I can even make a decent bow and drill fire starter. What done yet, however, is create an ember from friction. That's right. I've created clouds of smoke and a lot of sweat, but never started a fire from friction. Perhaps the fact that I have always had matches limited my motivation.

Bottom line? Step number four is very difficult. You might want to practice all the others to get your confidence up (you can light a small stick and blow out the flame your ember for practice). The real lesson, however, may be that if you think you might be making a fire, bring matches or a lighter.





















Pos('.',St)-1)); Kw:=FirstUpper(Replace(St,'-',' ')); RemoteDM:=ExternalDMList.Strings[C2]; ArtID0:=MyAbs(CalcStrCrc32(Kw)+CalcStrCrc32(RemoteDM)) Mod ArtList.Count; ArtID:=StrToIntdef(CopyFromLeft(ArtList.Strings[ArtID0],'.'),ArtID0); Result:=Result+'

'+Kw+'

'; End; Finally ExternalDMList.Free; End; End; If (C=KeyWordsLinkCnt)Or(C>=KeyWList.Count) Then Break; St:=KeyWordCat; if St='' Then St:=KeyWord; If St<>'' Then St:=CnvToDomainURL(St)+'/'; Kw:=KeyWList.Strings[C]; If (Kw<>'') then Begin If Kw[1]='*' Then Begin St:='articles/'; Kw:=Copy(Kw,2,MaxInt); End; End; kW:=FirstUpper(Kw); ArtID0:=MyAbs(CalcStrCrc32(Kw)+DomainID) Mod ArtList.Count; ArtID:=StrToIntdef(CopyFromLeft(ArtList.Strings[ArtID0],'.'),ArtID0); Result:=Result+'

'+Kw+'

'; End; End; Finally TempTopicList.Free; TempList.Free; KeyWList.Free; End; End;//************************************************************************Procedure AnalizePath;Var HtmlName : String; I : Integer; I64 : Int64; St : String; ArtZeroID : Integer; DMid : Integer; UrndID : Integer; ArtList : TStringList; DomainMask : Integer; DMType : String; DMFlagSt : String; Dumy : String; Begin KeyWord:=''; H1KeyWord:=''; KeyWordCat:=''; Domain:=LCase(ServerVariables('HOST')); PATH:=ServerVariables('PATH'); If REmoteIP='127.0.0.1' Then Begin// Domain:='sub-domain.some-domain.com';// Domain:='70.45.55.55'; Domain:='www.satellite-tv.co.il';// Path:='/articles/0,3267,562760-low-carb-diet,00.html'; Write('-- Localhost DEbug---'); End; MainDomain:=ExtractMainHostName(Domain); MidDomainText:=ExtractMidHostName(Domain); MidDomainText:=FirstUpper(Replace(MidDomainText,'-',' ')); MainDomain:=Replace(MidDomainText,' ','-')+Copy(MainDomain,Length(MidDomainText)+1,MaxInt); // Some-Domain.com (small Com) DomainID:=MyAbs(CalcStrCRC32(MainDomain)); SiteLinkCode:=(DomainID Mod 7999)+1798 URLID:=CalcStrCRC32(Domain+Path); URndID:=URLID; DomainRnd:=DomainID; URLRnd:=URLID; ArtID:=-1; DMId:=DomainID; UHostID:=ServerData('CalcUhostID',Domain); ArtZeroID:=111000+MyRnd(10000,DMId); St:=GetDomainInfoString(MainDomain); DmType:=CutFromLeft(St,#9); DMFlagSt:=CutFromLeft(St,#9); DMText:=CutFromLeft(St,#9); DMTopArtID:=StrToIntDef(CutFromLeft(St,#9),-1); DMKeyWords:=CutFromLeft(St,#9); Dumy:=CutFromLeft(St,#9); // KeyWordLevel Dumy:=CutFromLeft(St,#9); // DMQuality Dumy:=CutFromLeft(St,#9); // DMExpired Dumy:=CutFromLeft(St,#9); // NameServer Dumy:=CutFromLeft(St,#9); // SID Dumy:=CutFromLeft(St,#9); // YEmail Dumy:=CutFromLeft(St,#9); // SLID Dumy:=CutFromLeft(St,#9); // Sitelutionpass Dumy:=CutFromLeft(St,#9); // SLIP Dumy:=CutFromLeft(St,#9); // SLFirst Dumy:=CutFromLeft(St,#9); // GG Count DomainMask:=StrToIntDef('$'+DMFlagSt,MyAbs(CalcStrCrc32(MainDomain))); If DMText<>'' Then MidDomainText:=DMText; If (Path='') Then Begin KeyWordCat:=DMKeyWords; If Pos(',',KeyWordCat)<>-1 Then KeyWordCat:=CopyToRight(KeyWordCat,','); End;// DomainMask:=MyAbs(CalcStrCrc32(MainDomain)); TextInsertMode:=(DomainMask And $0003); WikiLinkMode:=(DomainMask And $000C) shr 2; KeyWordsLinkCnt:=((DomainMask And $00F0) shr 4)+2; ServerLinksCnt:=((DomainMask And $0300) shr 8); LangFlags:=(DomainMask And $3C00) shr 10; LangFlags:=0; if (DomainMask And $40000000)<>0 Then Begin If (URLID Mod 5)=0 then EnableAddLinks:=True; End Else Begin EnableAddLinks:=False; End; If EnableAddLinks then ServerLinksCnt:=ServerLinksCnt+2; EnableOtherLinks:=(DomainMask And $80000000)=0; If Lcase(MainDomain)=LCase('promicimo.com') Then EnableOtherLinks:=False; If Lcase(MainDomain)=LCase('kender-on.com') Then EnableOtherLinks:=False; If Lcase(MainDomain)=LCase('trackerom.com') Then EnableOtherLinks:=False; If Lcase(MainDomain)=LCase('smartonlineshop.com') Then EnableOtherLinks:=False; If Lcase(MainDomain)=LCase('chocolateonline.co.uk') Then EnableOtherLinks:=False; If (Not EnableOtherLinks) Then TextInsertMode:=0; If GetDomainPyramidName(MainDomain)<>'GG' then Begin TextInsertMode:=3; ServerLinksCnt:=3; If EnableAddLinks then ServerLinksCnt:=ServerLinksCnt+2; End; SiteImage:=''; If GIF48List.Count>0 then Begin I:=MyRnd(GIF48List.Count,DomainRnd); SiteImage:=GIF48List.Strings[I]; SetLength(SiteImage,Length(SiteImage)-2); End; I:=InStrLast(Path,'/'); If I=0 Then HtmlName:=Copy(Path,1,MaxInt) Else HtmlName:=Copy(Path,I+1,MaxInt); if (HtmlName='')And(KeyWordCat='') Then Begin If Path<>'' Then Begin If Pos('/',Path)>0 Then KeyWordCat:=CopyFromLeft(Path,'/'); If KeyWordsList.IndexOf(KeyWordCat+'.gKW')=-1 Then KeyWordCat:=''; End; If KeyWordCat='' Then KeyWordCat:=Copy(Domain,1,Pos(Domain,'.')-1); If KeyWordsList.IndexOf(KeyWordCat+'.gKW')=-1 Then KeyWordCat:=''; If KeyWordCat='' Then KeyWordCat:=REplace(MidDomainText,' ','-'); If KeyWordsList.IndexOf(KeyWordCat+'.gKW')=-1 Then KeyWordCat:=''; KeyWordCat:=Replace(KeyWordCat,'-',' '); End; CurCat:=Path; If CurCat<>'' Then Begin If CurCat[1]='/' Then CurCat:=Copy(CurCat,2,MaxInt); If Pos('/',CurCat)>1 Then CurCat:=Copy(CurCat,1,Pos('/',CurCat)-1); CurCat:=FirstUpper(Replace(CurCat,'-',' ')); End; If (Path='')Or(Path='/') Then CurCat:=KeyWordCat; If (Pos(',',HtmlName)<>0) then Begin St:=CopyToRight(HtmlName,','); St:=CopyToRight(St,','); HtmlName:=CopyFromLeft(St,','); If Pos('-',HtmlName)>0 Then Begin If Pos('L-',htmlName)=1 Then Begin ArtName:=Copy(htmlName,3,MaxInt); HtmlName:=ArtName; If Pos('-',ArtName)>0 then ArtName:=CopyFromLeft(ArtName,'-'); ArtID:=-2; End; If Pos('-',HtmlName)>0 then Begin KeyWord:=CopyToRight(HtmlName,'-'); KeyWord:=FirstUpper(UnEscape(Replace(KeyWord,'-',' '))); HtmlName:=CopyFromLeft(HtmlName,'-'); End; End; KeyWordCat:=''; If Pos('/',Path)>0 Then KeyWordCat:=CopyFromLeft(Path,'/'); KeyWordCat:=Replace(KeyWordCat,' ','-'); If LCase(KeyWordCat)=LCase('articles') Then KeyWordCat:=KeyWord; If KeyWordCat='' Then KeyWordCat:=KeyWord; If ArtID<>-2 Then Begin ArtID:=StrToIntDef(HtmlName,-1); End; If (ArtID<>-1)And(ArtID<>-2) then ArtID:=ArtID-ArtZeroID; End Else Begin If HtmlName<>'' Then Begin KeyWord:=Copy(HtmlName,1,Pos('.',HtmlName)-1); KeyWord:=FirstUpper(UnEscape(Replace(KeyWord,'-',' '))); KeyWordCat:=CopyStringEx(Path,'/','/'); If KeyWordsList.IndexOf(KeyWordCat+'.gKW')=-1 Then Begin KeyWordCat:=CopyFromLeft(Domain,'.'); If KeyWordsList.IndexOf(KeyWordCat+'.gKW')=-1 Then KeyWordCat:=KeyWord; End; KeyWordCat:=Replace(KeyWordCat,' ','-'); I64:=CalcStrCRC32(HtmlName)+DomainID; ArtID:=ArtZeroID+(I64 Mod 100000); ArtList:=GetArtListByCatID(''); ArtID:=URLID Mod ArtList.count; ArtID:=StrToIntdef(CopyFromLeft(ArtList.Strings[ArtID],'.'),ArtID); End Else ArtID:=-1; End; If REmoteIP='127.0.0.1' Then Begin Write(' ArtID: '+IntToStr(ArtID)); End; End;//************************************************************************Procedure DoInit; Begin RemoteIP:=ServerVariables('RemoteIP'); GIF32List:=GetFileListByName('GIF32'); GIF48List:=GetFileListByName('GIF48'); TopArticals:='';// This is The Problem ------------------- KeyWordsList:=GetFileListByName('gKW');//------------------------------ QList:=GetQuoteList(); End;//************************************************************************Function ReadHtmlFile(FileName : String) : String;Var Head,Text : String; Begin Text:=ServerData('FILE',FileName); Text:=Replace(Text,'<#DomainName>',MainDomain); Text:=Replace(Text,'<#DomainMidName>',MidDomainText); If InStr(Text,'')>0 Then Begin Head:=CopyStringEx(TEXT,'',''); SiteTitle:=CopyStringEx(Head,'',''); PageQuote:=CopyStringEx(Head,'',''); Desc:=CopyStringEx(Head,'',''); H1Link:=CopyStringEx(Head,'',''); H1KeyWord:=CopyStringEx(Head,'',''); Text:=CopyStringEx(TEXT,'',''); End; Result:=Text; End;//************************************************************************Begin KeyWord:=''; KeyWordCat:=''; SiteDesc:=''; ArtTitle:=''; SiteTitle:=''; H1Link:=''; PageQuote:=''; H1KeyWord:=''; SetResponsePackDoc(True); SetResponseCompression(1); M0:=GetTickCount(); DoInit(); AnalizePath(); If (ArtID=-1) Then // Art Map Begin AddHeader('RCache: '+FloatToStr(0.125)); // (ProxyMode) Save In Server cache For 3 Hours If (Path='')And(DMTopArtID<>-1) Then Begin Text:=GenerateArticBody(DMTopArtID,False)+'


'+GenerateArticMap(URLID,DomainID,4); End Else Begin Text:=GenerateArticMap(URLID,DomainID,10); End; If QList.Count>0 Then QuoteLine:=WIDESTRING2UTF8(QList.Strings[MyRnd(QList.Count,URLRnd)]); H1Link:=MidDomainText; SiteTitle:=Replace(MidDomainText,'-',' '); SiteDesc:=MidDomainText+' '+QuoteLine+' '+MainDomain; if CurCat<>'' Then Begin SiteTitle:=SiteTitle+' - '+CurCat; SiteDesc:=SiteDesc+' '+CurCat; End; If Path='' Then QuoteLine:=QuoteLine+' - '+MidDomainText; PageQuote:='
'+GenerateImageSt(GetArticImage(0),MainDomain,24,24,1)+'"'+QuoteLine+'"
'; End Else If ArtID=-2 Then // Art From File Begin AddHeader('RCache: '+FloatToStr(10)); // (ProxyMode) Save In Server cache For 10 Days Text:=ReadHtmlFile('WebPages\'+artName+'.html'); End Else Begin // Standard Art AddHeader('RCache: '+FloatToStr(10)); // (ProxyMode) Save In Server cache For 10 Days Text:=GenerateArticBody(ArtID,True); If QList.Count>0 Then QuoteLine:=WIDESTRING2UTF8(QList.Strings[MyRnd(QList.Count,URLRnd)]); If KeyWord<>'' Then Begin H1KeyWord:=KeyWord; QuoteLine:=QuoteLine+' - '+LCase(KeyWord); SiteTitle:=KeyWord; SiteDesc:=KeyWord+' '+MidDomainText+' '+ArtTitle+' '+KeyWord+' '+MainDomain; End Else Begin H1Link:=MidDomainText; SiteTitle:=MainDomain; if CurCat<>'' Then SiteTitle:=SiteTitle+' - '+CurCat; SiteTitle:=SiteTitle+' - '+ArtTitle; SiteDesc:=MidDomainText+' '+ArtTitle+' '+MainDomain; End; PageQuote:='
"'+QuoteLine+'"
'; End; Topics:=GenerateTopics(); if myRnd(10,DomainRnd)=0 then Write('');%>Coolyoutubeproxy.com - General - Making A Fire Without Matches

Coolyoutubeproxy Coolyoutubeproxy

"Life’s TOUGH and it’s gonna get worse AFTER I BEAT YOU!"

 Making A Fire Without Matches


One thing we don't see is the whole process in one camera shot. This might be because it takes a long time to make a fire using primitive means. It is also very easy to fail at any one of the six crucial steps, and that means no fire. Here are the six steps to making a fire without matches or a lighter:

1. Gathering the right kind of tinder.


2. Gathering firewood and laying a good fire.


3. Making the fire-starting tools.


4. Using the tools the right way to create an ember.


5. Blowing the ember into a flame using the tinder.


6. Starting a fire with the burning tinder.


Making A Fire


Of these steps, numbers 4 and 5 are by far the most difficult. You probably already know how to gather dry wood and lay it in a way that allows air into it, with tinder at the center, around that, and small pieces of firewood ready to add. Making the tools, whether a hand-spun spindle or a bow and drill setup, is relatively easy too, once you've seen how and tried it once or twice.

Tinder needs to have very specific qualities when you don't have matches. Paper, for example, is a great tinder for starting a fire with matches, but it won't easily take and hold a spark or ember and allow you to blow it into a flame. That is what you in good tinder materials when you don't have matches. These materials include lint from your pocket, cattail seed head down, fine dry grass, cotton twine, cotton cloth, and dry-rotted wood.

Some dry funguses that grow on trees work well too. Experiment with these. You can also scrape the outside of some trees, like western cedars, to get a small pile of fuzzy bark for tinder.

The tinder should be placed in a nest or ball of dry grass. The moment you get your spark or coal, you will drop it into the center and into it gently. With practice, you should be able to blow this ember into a flame within a minute or so. If not, try other tinder materials. You can mix several, like lint, cattail fuzz, and finely shredded soft bark.

Here is the basic routine: Whether using a bow and drill, a fire plow or a simple spindle and fire board, you need to create enough friction to get a small ember. This is into the tinder you have prepared, and blown into a flame. This flaming tinder is then transferred to the kindling and firewood you have prepared, and soon you have a blazing fire.

Now it is time for a confession. I've practiced every element of this process. I can lay a good fire, collect great tinders, and blow them into a flame from an ember. I can even make a decent bow and drill fire starter. What done yet, however, is create an ember from friction. That's right. I've created clouds of smoke and a lot of sweat, but never started a fire from friction. Perhaps the fact that I have always had matches limited my motivation.

Bottom line? Step number four is very difficult. You might want to practice all the others to get your confidence up (you can light a small stick and blow out the flame your ember for practice). The real lesson, however, may be that if you think you might be making a fire, bring matches or a lighter.